Konica Minolta KIP Color 80 - Manual (Page 43)

1-38
2. 7 Dehumidifying the Roll Media
A print defect may occur if the roll media is very humid. The usual defects are “crease of media”
and “lack of image”.
Roll media will become humid if it is kept in the Roll Deck for a long time, and will result in the
above types of issues. Turn on the Dehumidify Heater to dehumidify the roll media if the room has
too much humidity (higher than 60%RH). Then the above image issues should be resolved.
1. Open the Right Side Door.
Normal Print
Normal Print
When media is humidified;
When media is humidified;
Crease of media
Lack of image
Right Side Door