Konica Minolta KIP Color 80 - Manual (Page 2)

(1)
Thank you for purchasing the KIP Color 80 Digital Color / Mono Large Format Printer.
This USER’S MANUAL contains functional and operational explanations for the KIP Color 80.
Please read this USER’S MANUAL carefully before using the Printer.
Please keep this USER’S MANUAL for future reference.
When this machine is installed in U.S.A.
This equipment satisfies the requirements in Part 15 of FCC Rules for a Class A computing device.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
When this machine is installed in Europe
This equipment satisfies the requirements in Pub.22 of CISPR Rules for a Classic B computing
device.
Operation of this equipment in a residential area may cause unacceptable interference to radio and
TV reception requiring the operator to take whatever steps are necessary to correct the
interference.
Do not install this machine around electronic equipment or precision instruments.
Other devices may be affected by electrical noise during operation.
If Machine is installed near other electronic equipment, such as a TV or a radio, interference
to said equipment, such as noise or flickering, may occur.
Use a separate power line and install the PRINTER as far as possible from said equipment.
The International
E NERGY S TAR ® Office Equipment Program is an international program that
promotes energy saving through the penetration of energy efficient computers and other office
equipment. The program backs the development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which business proprietors can
participate voluntarily. The targeted products are office equipment such as computers, monitors,
printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are
uniform among participating nations.
As an E NERGY S TAR ® Partner, Katsuragawa Electric Co., Ltd. has determined
that this product meets the E NERGY S TAR ® guidelines for energy efficiency.
NOTE
The KIP Color 80 will require a print finisher. Either a KIP print stacker or a KIP folder is
available. Please ask your Service or Sale Personnel for details on the optional devices.
The symbol shown indicates that this product conforms to
SJ/T11364-2006 of People’s Republic of China Electronic
Industry Standard and does not apply to countries outside of
People’s Republic of China.
The symbol shown indicates that this product conforms to GB
18455-2001 11364-2006 of National Standard of the People’s
Republic of China and does not apply to countries outside of
People’s Republic of China.