Konica Minolta KIP Color 80 - Manual (Page 17)

1-12
Name of part Function
Fuser Upper Cover Can access the media mis-fed around the entrance of the Fuser
Unit.
Fuser Cover Can access the media mis-fed around the Fuser Unit by opening the
Fuser Cover.
Transportation Unit 1 Can access the media mis-fed around the Transportation Unit 1.
Transportation Unit 2 Can access the media mis-fed around the Transportation Unit 2.
Transportation Unit 3 Can access the media mis-fed around the Transportation Unit 3.
Transportation Unit 4 Can access the media mis-fed around the Transportation Unit 4.
Power Cord To be connected to the wall outlet alone.
NOTE : Specification for the power cord used in North America
Use the following type of power cord (UL-Listed).
(1) Rating 250VAC, 20A
(2) Plug type NEMA6-20
(3) Socket type IEC60320 : C19
(4) Cord SJT 3xAWG12 L <4.5m
(5) UL-Listed
AC Main Switch Supplies or shuts off the AC main power.
Stacker Communication
Port Connect the signal cable from the Auto Stacker. Connector type is
RJ11 : 5VDC max
(NOTE : Do not connect a telephone line.)
PC Port
(Service use only) Service personnel only use this port :
USB 2.0 Type B male : 5VDC max
Interface VIII A
Not Used
MDR Connector 36 pins : 3.3VDC max
Interface VIII B (for
KCS) Connect the signal cable from the PC unit.
MDR Connector 36 pins : 3.3VDC max
Folder Port Not Used