Konica Minolta KIP Color 80 - Manual (Page 119)

1-114
3. 2.12 Mis-feed in the Fuser Region (Code: J-0131, J-0231 & J-0431)
When the roll media is mis-fed around the Fuser region, any of J-0131, J-0231 and J-0431 is
indicated. (Refer to the following section picture for the location of mis-fed media.)
Fuser region
Remove the mis-fed media as instructed in below.
1. Open the Fuser Upper Cover.
2. Open the Right Side Door.
Fuser Upper Cover
CAUTION
(1) Inside of the covers of the Fuser Region is extremely hot, and the mis-fed media is also
hot. Take great care not to be burnt when removing the mis-fed media.
(2) Some sharp parts exist inside of the Fuser Region. Take great care not to be injured
touching such part when removing the mis-fed media.
Right Side
Door