Konica Minolta PageScope Enterprise Suite - Manual (Page 36)

Operating My Print Manager 3
My Print Manager 3-4
3.2.2 Printing from a Device
This section will explain how to print spooled print job from a device that has
been registered to My Print Manager. You can use either of the following
methods to print data. The method can be changed through the ID & Print
Setting.
-
"Selecting Print Job and Then Printing It" on page 3-5
- "Using ID & Print to Print Data" on page 3-7
Print job that has been printed is deleted from the My Print Manager server.
Even after it is printed, print job that has been saved to your favorites is not
deleted.
2
Reminder
When you are using a device that does not support OpenAPI, if you are
using the Enterprise Suite Terminal and are using the Authentication
Manager to manage the device, you can print by using the "Follow-me"
feature.
2
Reminder
For details on the ID & Print Setting, see "Configuring ID & Print Settings"
on page 3-18.
2
Note
ID & Print can only be used to print data from a device that is managed
by the Authentication Manager.
2
Note
Depending on a device's authentication settings, you may have to
register users on the device. For details, consult your system
administrator.
2
Reminder
The appearance of the login screen differs depending on the device's
authentication method.