Konica Minolta bizhub 42 - Manual (Page 102)

bizhub 42/36 11-2
11.1 Glossary 11
11 Appendix
11.1 Glossary
The following describes the terms used in Copy mode.
Term Description
[Background Removal] Function that adjusts the background density of the original with a
colored background. Select a background removal method and lev-
el to copy the original.
[Binding Position] Specify the original binding position (page margin) to prevent the
copy from being printed upside-down when scanning a 2-sided
original.
[Change Tray Settings] Function that copies the original with a paper size not specified in
the paper tray or copies it on paper other than plain paper.
[Contrast] Function that adjusts the contrast between light and dark.
[Density] Function that adjusts the density of the print image in nine levels.
[Duplex/Combine] Function to specify the scanning side of the original and the printing
side of the paper to be 1-sided or 2-sided.
[Finishing] Allows you to select how to sort or finish copies when feeding them
into the output tray.
[Group] (Copy or Finishing) Function that prints copies in pages. This function first prints the
specified number of copies of the first page, and then prints the sec-
ond page in the same way.
[ID Copy] Separately scans the contents of the front and back sides of a card,
for example, insurance card, driver's license, or business card, and
copies them together on one sheet. You can copy a card with the full
size or enlarge an image to fit paper. Using the card copy function,
you can save the number of sheets to be used.
[Manual] Function that enlarges or reduces the loaded original with the zoom
ratio specified using the keypad, and copies it on paper.
[Minimal] This setting slightly reduces the image of the original and copies it at
the center of the paper.
[Offset] Function that sorts copies.
[Original Direction] Function that specifies the orientation of the original loaded into the
ADF or placed on the Original Glass.
[Original Type] Function that allows you to select the desired functions according to
the original text or image type and adjust it to obtain better image
quality.
[Paper] Allows you to configure the type and the size of the paper to be print-
ed on.
[Proof Copy] Function that prints a sample copy and stops printing temporarily
before printing a large number of copies. This prevents copy errors
from occurring in a large number of copies.
[Separate Scan] Function that divides the original into multiple parts for scanning
when the number of original pages exceeds the maximum (50 pag-
es) that can be loaded into the ADF. You can scan the original and
batch-copies it as one copy job. You can also load the original on
the Original Glass or switch to the ADF during scanning.
[Sharpness] Function that emphasizes the edges of text so that it can be read
more easily. This function also enables you to adjust the original im-
age.
[Sort] (Copy or Finishing) Function that prints a document in sets of copies. The second copy
set is printed after all of the first copy set is finished.
[Staple] Function that staples copies.