Konica Minolta bizhub 42 - Manual (Page 25)

bizhub 42/36 3-7
3.2 Basic copy operations 3
% To interrupt the copy operation being performed, press the Stop key.
% A [Ready to Copy] message that appears during the current printing job indicates that the next orig-
inal can be scanned.
Functions that cannot be combined
Some settings cannot be combined with each other. If they are combined improperly, the settings will be giv-
en priorities in either of the two ways described below.
- The setting configured last is given priority. (The setting specified first is canceled.)
- The setting configured first is given priority. (A warning message appears.)