Konica Minolta bizhub 42 - Manual (Page 95)

bizhub 42/36 10-3
10.2 Machine specifications 10
10.2 Machine specifications
bizhub 42/36
Specifications
Type Scanner, printer, desktop, or stand-alone
Document holder Stationary (Unit scanning)
Photo conductor OPC
Light source CCFL Dual (Cold cathode fluorescent lamp)
Copy system Laser electrostatic copying
Developing system Dry 2-component HMT developing system
Fusing system Roller fusing system
Resolution Scanning 600 dpi e 1,200 dpi
Output 600 dpi e 600 dpi
Originals Type Sheets, books (two-page spread), three-dimensional
objects
Size Max. 8-1/2 e 14 (A4)
Weight 6-5/8 lb (3 kg) Three-dimensional objects
Copying paper type Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m 2 to 90 g/m 2 )), Thick 1 * (24-
3/16 lb to 39-7/8 lb (91 g/m 2 to 150 g/m 2 )), Thick 2 * (40-3/16 lb to 55-7/8
lb (151 g/m 2 to 210 g/m 2 )), Letterhead, Colored paper, Transparency * ,
Postcard * , Envelope *
2-Sided: Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m 2 to 90 g/m 2 ))
* Available for Tray 1 (Bypass Tray).
Copy paper size <Tray 2/Tray 3>
8-1/2 e 11 v, 5-1/2 e 8-1/2 w, A4 v, B5 v
<Tray 1 (Bypass Tray)>
8-1/2 e 14 w, 8-1/2 e 11 w/v, 10-1/2 e 7-1/4 v, 5-1/2 e 8-1/2 w, A4 v,
B5 v, A5 w, B6 w, A6 w, 4 e 6 w, 8 e 13 w
* , 16K v
Width: 3-9/16 to 11-11/16 inches (90 mm to 297 mm), Length: 5-1/2 to 14
inches (140 mm to 356 mm)
* There are six types of foolscap: 8-1/2 e 13-1/2 w, 220 mm e 330 mm w,
8-1/2 e 13 w, 8-1/4 e 13 w, 8-1/8 e 13-1/4 w, and 8 e 13 w. Any one of
these sizes is selectable. For details, contact your service representative.
Number of sheets loaded in
Output Tray Plain paper 250 sheets
Thick 10 sheets
Transparency 1 sheet
Paper tray capacity
(8-1/2 e 11(A4)) Tray 2/Tray 3 Plain paper: 500 sheets
Tray 1
(Bypass Tray) Plain paper: 150 sheets, Thick 1/2: 20 sheets, Trans-
parency/Postcard: 20 sheets, Envelope: 10 sheets
Warm-up time Period from the time Power Switch was turned on to the time this machine
is ready for printing (room temperature: 73.4 °F (23 °C))
45 sec. or less
Warm-up time may vary depending on the operating environment and us-
age.
Image chipping width Top edge 3/16 inches (4.2 mm)
Bottom edge 1/8 inches (3.0 mm)
Right edge 1/8 inches (3.0 mm)
Left edge 1/8 inches (3.0 mm)
First copy
(When printing 8-1/2 e 11 v
(A4 v)) 8.7 sec. or less