Konica Minolta bizhub 42 - Manual (Page 54)

bizhub 42/36 5-14
5.9 [Separate Scan] 5
5.9 [Separate Scan]
When the original contains pages exceeding the capacity of the ADF, you can divide the original into several
batches to handle each lot as a single copy job. You can also use the copy function by switching between
the ADF and the Original Glass for scanning the originals.
0 Do not load original sheets beyond the upper limit for the ADF. It would cause jamming and/or spoiling
of the original or failure of the machine.
0 When making 2-sided or combined copies using the Original Glass, the machine can scan a number
of original pages without enabling Separate Scan.
1
Load the original.
2
Press [Copy] or the Copy key.
3
Specify the copy settings.
4
Press [Separate Scan].
5
Press [ON].
6
Press [OK].
7
Press the Start key.
The original is scanned.
8
Load the next batch of the original, and then press the Start key.
% To change the scanning settings, press [Change Settings].
9
Repeat Step 8 until all pages of the original are scanned.
10
After all original pages have been scanned, press [Finish].
d
Reference
To set the Separate Scan output method:
Press the Utility/Counter key ö [User Settings] ö [Copy Settings] ö [Separate Scan Output Method].