Konica Minolta bizhub 42 - Manual (Page 21)

bizhub 42/36 3-3
3.2 Basic copy operations 3
3.2 Basic copy operations
The following procedures describe how to set the original and the basic copy operations.
3.2.1 Placing originals
Place the original in the ADF or on the Original Glass. Select the optimal position for setting the original ac-
cording to the type of the original to be copied.
- Using the ADF, a multi-page original can be fed and scanned automatically, one page at a time from
the top. The ADF can also be used to scan 2-sided originals.
- When using the Original Glass, place the original directly on the Original Glass for scanning. This
method is suited for originals in the form of a book and the like that cannot be fed through the ADF.
Load the original, and configure settings for relevant functions as needed.
Loading the original into the ADF
The following types of originals should not be loaded into the ADF. If loaded, paper may be jammed or the
original may be damaged.
- Wrinkled, folded, curled, or torn originals
- Highly translucent or transparent originals, such as OHP transparencies or diazo photosensitive paper
- Coated originals such as carbon-backed paper
- Originals of which basis weight is less than 13-5/16 lb (50 g/m
2
) or greater than 34-1/16 lb (128 g/m
2
)
- Originals that are bound, for example, with staples or paper clips
- Originals that are bound in a book or booklet form
- Originals with pages bound together with glue
- Originals with pages that have had cutouts removed or are cutouts
- Label sheets
- Offset printing masters
- Originals with binder holes
- Originals that have just been printed with this machine
- Photographic paper
- Glossy originals like gloss coated paper
1
Slide the Lateral Guide to fit the size of the original.
2
Load the original face up in the Original Tray and arrange accord-
ing to the scanning order. Load the original by placing it so that its
head (top side) faces the left.
% Do not load more than 50 sheets and up to the point where the
top of the stack is higher than the , mark at one time. Such an
action may cause an original paper jam or damage to the orig-
inal. It may also invite machine failure. However, an original
that exceeds 50 pages can be scanned in separate batches.
% If the original is not loaded correctly, it may not be fed in
straight, causing it to jam or become damaged.
% If the original is loaded in any orientation other than with the
head (top) of the original toward the left, be sure to select the
original orientation.