2 [copy settings, Copy settings] -5 – Konica Minolta bizhub 42 User Manual
Page 66
bizhub 42/36
6-5
6.2
[Copy Settings]
6
6.2
[Copy Settings]
Configure the settings used by the copy functions.
%
Press the Utility/Counter key ö [User Settings] ö [Copy Settings].
Settings
[Auto Zoom for Combine]
Configure whether the preset zoom ratios are automatically selected when
Combine is selected in Auto Paper mode.
•
Select the Auto Zoom for Combine for the following zoom settings:
4 in 1: 50.0%
[Default Copy Settings]
Configure the initial values for the Copy function to be displayed when the
power in turned on or the Reset key is pressed.
[Factory Default]
The factory settings are used as the default set-
tings.
[Current Setting]
The current settings are used as the default set-
tings.
[Separate Scan Output
Method]
Configure the output for divided original loaded in the ADF or for multiple
pages of the original scanned on the Original Glass.
[Batch Print]
Printing begins after all pages of the original have
been scanned.
[Page Print]
Printing of copies that can be printed begins while
the original is being scanned.
Factory default
[Auto Zoom for Combine]
[Yes]
[Default Copy Settings]
[Factory Default]
[Separate Scan Output
Method]
[Page Print]