3 direction settings - binding position, 4 despeckle, Direction settings - binding position -19 – Konica Minolta BIZHUB C360 User Manual
Page 105: Despeckle -19, P. 6-19), Especkle] (p. 6-19), P. 6-19, Despeckle] (p. 6-19)
bizhub C360/C280/C220
6-19
6.3
Original Settings
6
6.3.3
Direction Settings - Binding Position
Select the binding position of the original when it has punched holes or is stapled. When a double-sized orig-
inal is scanned, the binding position is corrected on the back side.
6.3.4
Despeckle
Reduces the influence of a dirt of the slit glass upon the scanned image when loading an original in the ADF.
Reference
-
Specifying Despeckle will drop the scanning speed.
-
If the slit glass is too dirty, clean it. For details, refer to the [User's Guide Copy Operations].
Item
Description
[Auto]
Sets the binding position to the long side if the size is 11-11/16 inches (297 mm) or
smaller, or the short side otherwise.
[Top]
Select this setting if the original is loaded with the binding position at the top.
[Left]
Select this setting if the original is loaded with the binding position at the top.