Konica Minolta FK-505 - Manual (Page 75)

4 4.1 Transmission Methods
4-14 Fax kit FK-505
F
a
x T
ran
sm
is
si
on
/R
ec
ep
ti
o
n
Me
th
od
s
Ch
apte
r 4
Relay Initiation Transmission
Documents can be sent from this machine (transmitting station) to another fax
machine (acting as a relay station), which then sends the documents to multiple
recipients (receiving stations). By relaying the documents through a fax machine
closer to the remote recipients, the transmission time and cost for the transmitting
station are reduced.
In order to fax using relay initiation transmission, a relay box must first be
programmed at the relay station.
✎
Note
Relay initiation transmission is compatible with F code transmission.
Only machines that are compatible with relay broadcast transmission should be
specified as relay stations. This machine can be specified as a relay station.
Relay initiation transmission and mailbox transmission cannot be performed at
the same time.
In order to fax using relay initiation transmission, a relay box ID must first be
programmed at the relay station (p. 6-21).
To fax using relay initiation transmission
1 Position the document to be faxed.
2 If necessary, change the “Resolution” setting (p. 3-11).
3 Press the [Function] key.
4 Press the [7] key from the 10-Key
Pad.
or
Press the [Function] key seven
times to select “RELAY INITIATE”,
and then press the [Yes] key.