6 specifying initial user data, Selecting the “initial user data” menu, Specifying initial user data -51 – Konica Minolta FK-505 User Manual
Page 150: Selecting the “initial user data” menu -51
6.6 Specifying Initial User Data
6
Fax kit FK-505
6-51
Us
ing t
he Ut
ility
Mo
de
(F
ax
)
Ch
apt
er
6
6.6
Specifying Initial User Data
Various settings for the machine’s user data can be specified.
Refer to the following table for details on each function.
The settings for items 2 and 3 can also be specified from LSD (Local Setup for
Diagnostic). For details, refer to “About Local Setup for Diagnostic (LSD)” on
page 7-14.
If optional Network interface card NC-502 and Scanner unit SU-502 are installed,
settings for items 2 and 3 can also be specified from the network tool PageScope
Web Connection. For details, refer to “What is PageScope Web Connection?” on
page 7-9.
Selecting the “INITIAL USER DATA” menu
1
Press the [Utility] key twelve times.
“INITIAL USER DATA” appears.
2
From the 10-Key Pad, press the key ([1] through [3]) for the INITIAL USER
DATA function that you wish to set.
❍
The INITIAL USER DATA functions are as follows:
1 DATE&TIME
2 USER FAX NO.
3 USER NAME
✎
Tip
To quit changing initial user data settings, press the [No/C] key. “STOP
SETTING?” appears. Press the [Yes] key to quit changing the settings.
No.
Name
Description
1
DATE&TIME
The date and time for the machine can be specified.
2
USER FAX NO.
The fax number for the machine can be specified.
3
USER NAME
The fax name for the machine can be specified.