Konica Minolta FK-505 - Manual (Page 131)

6 6.2 Setting Up the Transmission
6-32 Fax kit FK-505
Us
ing t
he Ut
ility
Mo
de
(F
ax
)
Ch
apt
er
6
Selecting the “TX OPERATION” menu
1 Press the [Utility] key eight times.
“TX OPERATION” appears.
2 From the 10-Key Pad, press the
key ([1] through [4]) for the “TX
OPERATION” function that you
wish to set.
❍ The “TX OPERATION”
functions are as follows:
1 SCAN CONTRAST
2 RESOLUTION
3 DEFAULT TX
4 HEADER
✎
Tip
If, at any time, you wish to quit setting a “TX OPERATION” function, press the
[No/C] key. When the message “STOP SETTING?” appears, press the [Yes]
key to quit.
Specifying the Setting for “SCAN CONTRAST”
1 Select the “TX OPERATION”.
❍ Refer to “Selecting the “TX OPERATION” menu” on page 6-32.
2 Press the [1] key from the 10-Key
Pad to select “SCAN
CONTRAST”.
3 Using the [ ] and [Ö ] keys, select
one of the five settings between
“LIGHT” and “DARK”, and then
press the [Yes] key.
The “TX OPERATION” menu
appears again.
Ц