Konica Minolta FK-505 - Manual (Page 31)

2 2.2 Names of Control Panel Parts and Their Functions
2-4 Fax kit FK-505
Pr
ec
au
tio
n
s
Ch
apte
r 2
9 [Zoom] key, [ ▼] and [▲] keys • Used to select a preset enlargement or reduction ratio.
• A zoom ratio between × 0.25 and × 4.00 can be selected
when the paper size is selected manually. (Manual paper
selection)
• A zoom ratio between × 0.50 and × 2.00 can be selected
when the paper size is selected automatically. (Auto paper)
• Used to specify the selection above or below in setting
screens and menus.
10 [Paper] key Used to select the size of the paper to be printed on.
11 [Auto/Photo] key, [ ] and
[ ] keys
• Used to specify the scanning density of copies.
• Used to specify the selection at the left or right in setting
screens.
12 [Erase] key Used to select the area of the document that is erased.
13 [File Margin] key Press to select the “File Margin” function.
14 [Finishing] key Used to select a copy “Finishing” function.
15 [X/Y Zoom] key Used to specify different scaling proportions for the vertical and
horizontal directions.
16 [Neg. Pos.] key Press to make copies with the dark- and light-colored areas of
the document inverted.
17 [Copy] key Used to select the “2in1”, “4in1” or “Duplex” Copy settings.
18 [Copy Program] key • Copy programs can be stored.
• Stored copy programs can be selected and recalled.
19 [Book Separation] key Used to select the “Book Separation” function.
20 [Original] key • Used to select between the “Duplex Orig.” function and the
“Mixed Orig.” function.
• If the Fax key was pressed, the “Mixed Orig.” indicator lights
up.
The “Duplex Orig.” function can be selected only when the
Reverse automatic document feeder is installed.
No. Part Name Function