Konica Minolta FK-505 - Manual (Page 146)

6.5 Setting Up the Report Output 6
Fax kit FK-505 6-47
Us
ing t
he Ut
ility
Mo
de
(F
ax
)
Ch
apt
er
6
6.5 Setting Up the Report Output
From the “REPORTING” menu, various functions are available for specifying which
reports are automatically printed.
The utility mode settings can also be specified from LSD (Local Setup for
Diagnostic). For details, refer to “About Local Setup for Diagnostic (LSD)” on
page 7-14.
If optional Network interface card NC-502 and Scanner unit SU-502 are installed,
settings can also be specified from the network tool PageScope Web Connection.
For details, refer to “What is PageScope Web Connection?” on page 7-9.
No. REPORTING Characteristic/Description
1 ACTIVITY REPORT Every 60 transmissions/receptions, a report can be printed to show the
results of the transmissions/receptions. This function can be used to set
whether the report is printed automatically when the 60th transmission/
reception is reached.
• The manufacturer’s default setting is “ON”.
2 RESERV.REPORT If multiple recipients are specified for transmission, such as with
broadcast transmission and polling reception, a report can be printed to
show specified settings. This function can be used to set whether this
report is printed automatically.
• The manufacturer’s default setting is “OFF”.
3 TX RESULT REPORT This function can be used to set whether the report showing the result of
a transmission is printed automatically after the transmission is finished.
• The manufacturer’s default setting is “OFF”.
4 RX RESULT
REPORT This function can be used to set whether the report showing the result of
a reception is printed automatically after mailbox reception is finished. (If
regular reception is not finished normally, a report will always be printed,
regardless of the selected setting.)
• The manufacturer’s default setting is “OFF”.