Konica Minolta FK-505 - Manual (Page 42)

3.1 Dialing 3
Fax kit FK-505 3-3
Fa
xin
g
Chap
ter
3
5 Press the [Start] key.
The machine automatically starts scanning the document and sending the fax.
To fax using one-touch dialing
If one-touch dial keys have already been programmed with fax numbers, the fax
number of a recipient can be specified by pressing just the corresponding one-
touch dial key.
For details on programming the one-touch dial keys, refer to “Setting Up One-Touch
Dialing (“ONE-TOUCH DIAL” function)” on page 6-4.
1 Load the document into the Automatic document feeder.
❍ For details on placing the document on the Original glass, refer to “To fax
documents positioned on the Original glass” on page 3-13.
2 Press the one-touch dial key ([01] through [27]) programmed with the fax
number that you wish to send the fax to.
✎
Tip
If the wrong one-touch dial key has been pressed, press the [No/C] key.
3 If necessary, change the “Resolution” setting (p. 3-11).
4 Press the [Start] key.
The machine automatically starts
scanning the document and
sending the fax.
✎
Tip
To stop the fax transmission,
press the [Stop] key, and then
press the [Yes] key when the next
screen appears.