Konica Minolta FK-505 - Manual (Page 135)

6 6.3 Setting Up the Reception
6-36 Fax kit FK-505
Us
ing t
he Ut
ility
Mo
de
(F
ax
)
Ch
apt
er
6
The utility mode settings can also be specified from LSD (Local Setup for
Diagnostic). For details, refer to “About Local Setup for Diagnostic (LSD)” on
page 7-14.
If optional Network interface card NC-502 and Scanner unit SU-502 are installed,
settings can also be specified from the network tool PageScope Web Connection.
For details, refer to “What is PageScope Web Connection?” on page 7-9.
Selecting the “RX OPERATION” menu
1 Press the [Utility] key nine times.
“RX OPERATION” appears.
2 From the 10-Key Pad, press the key ([1] through [9]) for the “RX OPERATION”
function that you wish to set.
❍ The “RX OPERATION” functions are as follows:
1 MEMORY RX MODE
2 NO. of RINGS
3 REDUCTION RX
4 RX PRINT
5 RX MODE
6 FORWARD
7 FOOTER
8 SELECT TRAY
9 CLOSED NETWORK
✎
Tip
If, at any time, you wish to quit setting/changing an “RX OPERATION” function,
press the [No/C] key. When the message “STOP SETTING?” appears, press
the [Yes] key to quit.
To exit the “RX OPERATION” menu, press the [Panel Reset] key. The main
screen appears again.