Konica Minolta FK-505 - Manual (Page 44)

3.1 Dialing 3
Fax kit FK-505 3-5
Fa
xin
g
Chap
ter
3
To fax using group dialing
If one-touch dial keys have already been programmed with a group of fax numbers,
the fax numbers of all recipients in the group can be specified by pressing just the
corresponding one-touch dial key.
For details on programming one-touch dial keys with a group of fax numbers, refer
to “Specifying the Setting for “GROUP DIAL”” on page 6-12.
1 Load the document into the Automatic document feeder.
❍ For details on placing the document on the Original glass, refer to “To fax
documents positioned on the Original glass” on page 3-13.
2 If necessary, change the “Resolution” setting (p. 3-11).
3 Press the one-touch dial key ([01]
through [27]) programmed with the
group of fax numbers that you
wish to send the fax to.
✎
Tip
If the wrong one-touch dial key
has been pressed, press the
[No/C] key.
4 Press the [Start] key.
The machine automatically starts
scanning the document and
sending the fax.
✎
Tip
To stop the fax transmission, press the [Stop] key, and then press the [Yes] in
the next screen that appears.