Konica Minolta FK-505 - Manual (Page 128)

6.1 Setting Up the Fax Registration 6
Fax kit FK-505 6-29
Us
ing t
he Ut
ility
Mo
de
(F
ax
)
Ch
apt
er
6
5 Using the 10-Key Pad, enter the 4-
digit password, and then press the
[Yes] key.
❍ The password can be set to
any number between 0000 and
9999.
❍ If you wish to change the password, press the [No/C] key, and then enter the
new password.
❍ If no password is to be specified, press the [Yes] key without entering
anything.
6 To send back a relay result report,
specify the recipient using either a
one-touch dial key or speed dial
number programmed with the
recipient’s fax number, and then
press the [Yes] key.
A screen appears, allowing you to
specify the receiving stations.
7 Using the one-touch dial keys or
the speed dial numbers, or by
entering the fax number using the
10-Key Pad, specify a receiving
station, and then press the [Yes]
key.
❍ A maximum of 50 recipients
can be specified as receiving
stations. Repeat this step until
all desired receiving stations are specified.
❍ To delete the currently selected recipient, press the [No/C] key.
8 When you are finished specifying
all receiving stations, press the
[Start] key.
The “FAX REGISTRATION” menu
appears again.