Konica Minolta bizhub 25e - Manual (Page 59)

2-26 Various printing methods
„ Changing the print density
You can adjust the density level of the printing result.
You can set adjust the density level to 50 levels of lightness or darkness.
A
Lighten
up to -50
Darken
up to +50
A A
1
Open the printer settings screen on the computer (page 2-4) .
2
Click the “Print Quality” tab.
3
Adjust the density in “Print Density”.
• To increase the density level, click [Darken].
• To decrease the density level, click [Lighten].
• You can also adjust the density level by dragging the slider in the center to the left or right.
• Click [Initialize] to return to the default setting.
4
Click [OK].