Konica Minolta bizhub 25e - Manual (Page 41)

2-8 Setting the printer
„ “Print Quality” tab
Item Description
Toner Saving Select “On” to restrict toner consumption.
Resolution Select the printing resolution.
Print Density Set the print density level (between -50 and 50).
Advanced Options
True Type Font
Printing
*1
Select the print processing method when using TrueType fonts.
PostScript Pass
Through
*2
When PostScript Pass Through is enabled, functions such as watermark,
combine, and booklet printing may not be printed correctly in some
application software.
For some applications, this is because PostScript data sent to printer cannot
be controlled by the driver. In this case, disable “PostScript Pass Through”.
If you disable “PostScript Pass Through”, application software may perform
unexpected operations. It is recommended that you normally enable this
function.
Graphic
enhanced mode
*3
The processing of the image data may become slower or printing may not be
performed correctly, depending on the application.
In such cases, printing may be performed correctly by enabling this setting.
However, it is recommended that you usually use the machine with this
setting disabled because it may cause printing not correctly.
Click [Advanced] and then check the box for “Graphic enhanced mode” to
enable this setting.
*1 This setting is available on PCL 5e and PCL 6 printer drivers, and PostScript 3 printer driver.
*2 This setting is available on PostScript 3 printer driver.
*3 This setting is available on GDI the printer driver.