Installing to mac os x, Installing via network connection, Installing to mac os x -22 – Konica Minolta bizhub 25e User Manual
Page 29: Installing via network connection -22

1-22 Installing to Mac OS X
Installing to Mac OS X
With a Macintosh, install the PPD file using the installer.
The installation procedure may slightly vary according to the version of the operating
system.
Installing via network connection
Installing to Mac OS X 10.4, 10.5, 10.6, 10.7 or 10.8
1
Insert the installation disk into the CD-ROM drive of the computer.
2
Double-click the CD-ROM and open the folder with the name that has the OS
version of your computer.
3
Launch the installer “KONICA MINOLTA bizhub 25e PS.pkg”.
4
Follow the instructions in the installer to perform the procedure.
5
After the installation is finished, restart the computer.
6
Remove the installation disk from the CD-ROM drive after restarting the
computer.
7
Select “System Preferences” from menu.
8
Click [Print & Fax] (or [Print & Scan] for OS X 10.7 and 10.8) in “Hardware”.
9
Click [+].
For OS X 10.7, then select “Add Other Printer or Scanner”.
10
Click [IP] (or [IP Printer] for OS X 10.4), and enter the required items.
• In the “Protocol” field, select “Line Printer Daemon - LPD” from the pull-down menu.
• Enter the IP address or DNS name for the printer to connect in the “Address” field.
• If necessary, enter the name to display in the print job list in the “Queue” field.
• If necessary, enter the location that the printer is installed in the “Location” field.
11
Select “KONICA MINOLTA bizhub 25e PS” in the “Print Using” field, and click
[Add].
• For OS X 10.4, select “KONICA MINOLTA” from the pull-down menu in the “Print Using”
field, and then select “KONICA MINOLTA bizhub 25e PS”.
• For OS X 10.5, select “Select a driver to use” from the pull-down menu in the “Print Using”
field, and then select “KONICA MINOLTA bizhub 25e PS”. You can filter the drivers by
entering “KONICA MINOLTA” in the search field.
• For OS X 10.6, 10.7 and 10.8, select “Select Printer Software” from the pull-down menu in
the “Print Using” field, and then select “KONICA MINOLTA bizhub 25e PS”. You can filter
the drivers by entering “KONICA MINOLTA” in the search field.
• If the driver is not found, select "Other" in the “Print Using” field, and browse to [Library]
[Printers] [PPDs] [Contents] [Resources] folder, then select “KONICA MINOLTA
bizhub 25e PS.ppd.gz”.