4 direct input, 1 fax, Direct input -11 – Konica Minolta bizhub 36 User Manual

Page 67: Fax -11, P. 6-11), Put (p. 6-11), P. 6-11

bizhub 42/36

6-11

6.4

Direct Input

6.4

Direct Input

Directly enter to specify the destination not registered.

Reference

If [Admin Settings] ö [Security Settings] ö [Security Details] ö [Manual Destination Input] is set to [Re-
strict], an address cannot be directly typed in.

Reference

For details on the Manual Destination Input, refer to the [User's Guide Administrator Operations].

6.4.1

Fax

Enter the fax number by using the Keypad or the panel buttons.

Reference

[Tone]: Press to send push-button tones when pulse dialing is being used. [T] appears in the screen.

[Pause]: Press to insert a pause when dialing. [P] appears in the screen.

[-]: Press to insert a dash as a separator symbol while dialing. This has no effect on the dialing.

After you press [OK], the screen to enter the fax number appears again if [Admin Settings] ö [Fax Settings]
ö [Fax Function Settings] ö [Cofirm Addr (TX)] is set to [ON]. Enter the fax number, and then press [OK].

This manual is related to the following products:

bizhub 42