Original direction, Orig. binding position, Original direction -17 orig. binding position -17 – Konica Minolta bizhub 42 User Manual
Page 59
bizhub 42/36
5-17
5.7
Settings
5
Original Direction
Select the orientation of the original. After the document is scanned, the data is processed so that it is cor-
rectly oriented.
Orig. Binding Position
Select the binding position of the original when it has punched holes or is stapled. This adjusts the scan of
double-sided originals so that the binding position is not reversed.
Item
Description
[Top]
Select this setting when the document is loaded with its top edge at the top.
[Bottom]
Select this setting when the document is loaded with its top edge at the bot-
tom.
[Left]
Select this setting when the document is loaded with its top edge at the left.
[Right]
Select this setting when the document is loaded with its top edge at the right.
Item
Description
[Left Bind]
Select this setting if there is a binding position on the left of the original.
[Top Bind]
Select this setting if there is a binding position on the top of the original.
[Auto]
Sets the binding position to the long side if the size is 11-11/16 inches (297
mm) or smaller, or the short side otherwise.