beautypg.com

4 registering the basic information, 1 to begin operation, 1 environment and device requirements – Konica Minolta bizhub 42 User Manual

Page 29: 2 connection and settings of network cable, Connection of network cable, Registering the basic information, To begin operation -2, Environment and device requirements -2, 4registering the basic information

background image

bizhub 42/36

4-2

4.1

To begin operation

4

4

Registering the basic information

This section explains the necessary settings and registrations before using the scan functions of this ma-
chine.

4.1

To begin operation

The following registrations are required in order to use this machine.

4.1.1

Environment and device requirements

The following environment and devices must be prepared to use various functions of this machine.

4.1.2

Connection and settings of network cable

To send image data over the network, such as the Network scan and application scan functions, connection
and settings of the network cable are required.

Connection of network cable

Connect a UTP cable (category 5 or later recommended) connected to the network to the Ethernet connector
on the machine.

It supports 1000Base-T, 100Base-TX, and 10Base-T standards.

Functions

Environment and device

Network scan function

Connection of network cable

Network settings

Application scan function

Connection of network cable

Network settings

Installation of scanner driver

This manual is related to the following products: