Konica Minolta bizhub 42 User Manual

Page 47

bizhub 42/36

5-5

5.1

Operation flow

Reference

This machine cannot automatically detect the size of an original document that will be scanned. Before
scanning the document, specify its size. If the size of the original document is not correctly specified,
some parts of the image may be lost. For details on specifying the size of an original document, refer
to page 5-15.

If the memory becomes full while the document is being scanned, scanning cannot continue. To send
the document pages that have already been scanned, press Start. To stop the transmission, press
[Cancel].

Reference

For the description and procedure on registering a program destination, refer to page 9-5 and page 10-17.

Load the original.

•

Do not load more than 50 sheets and up to the point where the top of the stack is higher than the , mark at one
time. Such an action may cause an original paper jam or damage to the original. It may also invite machine failure.
However, an original that exceeds 50 pages can be scanned in separate batches.

Press Start.

This manual is related to the following products:

bizhub 36