Konica Minolta bizhub 42 User Manual
Page 130
bizhub 42/36
10-14
10.5
User Mode Overview
10
[New Registration] ö [E-mail]
[New Registration] ö [FTP]
Item
Description
[No.]
Specify the registration number of the destination.
[Name]
Enter the destination name (up to 72 characters).
[Index]
Select the index character used when searching for the destination.
It is convenient to select the [Main] check box for a frequently used destination.
[E-mail Address]
Enter the E-mail address of the destination (up to 320 characters).
[S/MIME Certifi-
cation]
Displays whether a S/MIME certification is registered.
[Edit a Certifica-
tion]
Select the check box to edit information for the certificate.
[Register a Certification]: Select this option to specify a certificate file and register a
certification.
[Delete a Certification]: Select this option to delete a registered certification.
•
Certification information is supported only as a DER (Distinguished Encoding
Rules) file.
•
You cannot register a certification if the E-mail address of the destination does
not match that of the certification. Before registering a certification, check that
those E-mail addresses are the same.
Item
Description
[No.]
Specify the registration number of the destination.
[Name]
Enter the destination name (up to 72 characters).
[Index]
Select the index character used when searching for the destination.
It is convenient to select the [Main] check box for a frequently used destination.
[Host Address]
Enter the IP address of the destination FTP server.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can enter the host name instead.
For the host name, specify a fully-qualified domain name (FQDN).
When using IPv6, you can specify the IPv6 address.
[File Path]
Specify the destination directory (up to 127 bytes).
[anonymous]
Select whether to allow anonymous users to access the FTP server.
[User ID]
Enter the user ID to log in to the destination FTP server (up to 63 bytes).
[Password]
Enter the password to log in to the destination FTP server (up to 63 bytes).
Select the [Change Password] check box to change the password.
[PASV Mode]
Select whether to communicate in PASV mode.
[Proxy]
Select whether to use a proxy server.
[Port Number]
Enter a port number.