Konica Minolta bizhub 42 User Manual
Page 131
bizhub 42/36
10-15
10.5
User Mode Overview
10
[New Registration] ö [SMB]
[New Registration] ö [WebDAV]
Item
Description
[No.]
Specify the registration number of the destination.
[Name]
Enter the destination name (up to 72 characters).
[Index]
Select the index character used when searching for the destination.
It is convenient to select the [Main] check box for a frequently used destination.
[Host Address]
Enter the IP address of the destination computer.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can enter the host name instead.
For the host name, specify a fully-qualified domain name (FQDN).
When using IPv6, you can specify the IPv6 address.
To perform SMB transmission using an IPv6 address, set the Direct Hosting to [En-
able].
For details, refer to the [User's Guide Administrator Operations].
[File Path]
Specify the destination directory (up to 255 bytes).
[User ID]
Enter the user ID to log in to the destination computer (up to 255 bytes).
[Password]
Enter the password to log in to the destination computer (up to 127 bytes).
Select the [Change Password] check box to change the password.
Item
Description
[No.]
Specify the registration number of the destination.
[Name]
Enter the destination name (up to 72 characters).
[Index]
Select the index character used when searching for the destination.
It is convenient to select the [Main] check box for a frequently used destination.
[Host Address]
Enter the IP address of the destination WebDAV server.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can enter the host name instead.
For the host name, specify a fully-qualified domain name (FQDN).
When using IPv6, you can specify the IPv6 address.
[File Path]
Specify the destination directory (up to 142 bytes).
[User ID]
Enter the user ID to log in to the destination WebDAV server (up to 63 bytes).
[Password]
Enter the password to log in to the destination WebDAV server (up to 63 bytes).
Select the [Change Password] check box to change the password.
[SSL]
Select whether to use SSL for encryption.
[Proxy]
Select whether to use a proxy server.
[Port Number]
Enter a port number.