2 before using the scan function, 1 information, 1 scan function – Konica Minolta bizhub 42 User Manual
Page 12: Function type, Before using the scan function, Information -2, 2before using the scan function
bizhub 42/36
2-2
2.1
Information
2
2
Before using the Scan function
This section describes necessary information you should be aware of before using the scan function of this
machine.
2.1
Information
7 CAUTION
-
To turn the Power Switch off and on, first turn the power off, and then on again after 10 or more sec-
onds has elapsed. Not doing so may result in an operation failure.
2.1.1
Scan function
Function type
Using this machine, scanned images can be sent via network. In addition, using the applications available
from a computer on the network, you can scan documents. This User's Guide introduces the following func-
tions.
Notes on using Network scan/Application scan function
The following requirement must be met to use the Network scan or Application scan function.
-
The machine is connected to the network. (required)
The machine can be used over a TCP/IP network. First, connect the cable for connecting to the network.
For details, refer to page 4-2. In order to use this machine on a network, settings such as the IP address of
the machine must be specified. For details, refer to the [User's Guide Administrator Operations].
Functions
Transmission Options
Network scan function
•
•
FTP
•
SMB
•
WebDAV
•
Web Service
Local scan function
•
USB Memory
•
HDD
Application scan function
•
Scanner driver
•
Web Service