Ampro Corporation LITTLE BOARD 5001451A - Manual (Page 84)

3-4
! 5 to 95% relative humidity (non-condensing)
! Storage temperature: -55 ° to +85 ° C
! Weight: 11.6 oz. (329 gm), no DRAM installed
! Shock and Vibration: Designed to MIL-STD 202F, Method 213B, Table 213-I, Condition A
(three 50G shocks in each axis) and MIL-STD 202F, Method 214A, Table 214-I, Condition D
(11.95B random vibration, 100 Hz to 1000 Hz for 5 minutes per axis).
! ISA portion of the PC/104-Plus expansion bus
–
Female, non-stackthrough, 16-bit bus connectors, for expansion via PC/104 modules
–
Four mounting holes
! PCI portion of the PC/104-Plus expansion bus:
–
4x30 (120-pin) 2 mm pitch non-stackthrough connector.
–
Electrical specifications equivalent to the PCI Local Bus Specification Rev. 2.1.
Flat Panel Displays
The Little Board P6d display controller supports all flat panel display technologies including
plasma, electroluminescent (EL), and LCD. LCD panel types include single panel-single drive (SS),
and dual panel-dual drive (DD) configurations. The features of the Little Board P6d display
controller include graphics acceleration, MPEG1 and MPEG2 playback, Video capture, and motion
compensation for DVD.
Note
Flat panel support in the Little Board P6d ROM BIOS will change
from time to time to maintain compatibility with current panel
technology.
BIOS Modes
The video modes listed in this section show supported video BIOS modes. The support for these
modes is strictly from the video BIOS. No support from a software driver is needed to display one
of these modes. For Standard VGA Modes, see Table 3-1. For Low Resolution modes, see Table 3-2.
For Extended Modes, see Table 3-3.