Ampro Corporation LITTLE BOARD 5001451A - Manual (Page 76)

2-58
Setup 6 — PCI Configuration Setup
The Little Board P6d CPU BIOS incorporates automatic PCI IRQ configuration for peripherals.
You can, however, override the automatic features and specify PCI IRQ settings with SETUP 6.
Figure 2-12 shows what can be configured on SETUP 6. A description of each option is listed below.
PCI CONFIGURATION SETUP
Ampro Computers, Inc.
1st Available IRQ :10
2nd Available IRQ :11
3rd Available IRQ :9
4th Available IRQ :5
ESC:Quit
↑ ↓ → ←
:
Select Item
F1 :Help PU/PD/+/- :
Modify
F5 :Old Values (Shift)F2:Color
F6 :Load BIOS Defaults
F7 :Load Setup Defaults
Figure 2-12. Setup 6 — PCI Configuration Setup
This Setup screen allows you to configure the following parameters:
! Nth Available IRQ — selects the order in which ISA IRQ channels can be assigned to PCI
devices.
! PCI IDE Options — these options must be left in their default state.
Note
PCI interrupts may not be sharable with NON-PCI hardware onboard
or on the ISA bus. For example, if you are using IRQ10 for a serial
port and also have it assigned to the PCI bus, the serial interrupt will
not occur.