Ampro Corporation LITTLE BOARD 5001451A - Manual (Page 2)

ii
TRADEMARKS
The Ampro logo is a registered trademark, and Ampro, EnCore, Little Board, CoreModule, and MiniModule are trademarks
of Ampro Computers, Inc. Pentium is a registered trademark of Intel, Incorporated. All other marks are the property of
their respective companies.
NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise, without prior written permission from Ampro Computers, Incorporated.
DISCLAIMER
Ampro Computers, Incorporated makes no representations or warranties with respect to the contents of this manual or of
the associated Ampro products, and specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose. Ampro shall under no circumstances be liable for incidental or consequential damages or related
expenses resulting from the use of this product, even if it has been notified of the possibility of such damages. Ampro
reserves the right to revise this publication from time to time without obligation to notify any person of such revisions. If
errors are found, please contact Ampro at the address listed on the title page of this document.
REVISION HISTORY
Revision Reason for Change Date
1 Pre-Production Release 08/00
A Production Release 11/00
B Updates/Revisions 02/02
© Copyright 2000, 2002, Ampro Computers, Incorporated
AUDIENCE ASSUMPTIONS
This reference manual is for the person who designs computer related equipment, including but not limited to hardware
and software design and implementation of the same. Ampro Computers, Inc. assumes you are qualified in designing and
implementing your hardware designs and its related software into your prototype computer equipment