Lenovo ThinkPad T540p - Manual (Page 129)

Table 4. Config menu items (continued)
Menu item Submenu item Selection Comments
Password Beep • Disabled
• Enabled
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password. Beep and Alarm
Keyboard Beep • Disabled
• Enabled
Enable this option to
have a beep sound
when unmanageable key
combination are pressed.
Serial ATA (SATA) SATA Controller Mode
Option • AHCI
• RAID (for RAID models
only)
For RAID models, the option
RAID is enabled by default.
Core Multi-Processing • Disabled
• Enabled
Select Enabled to enable
additional execution core
units within a CPU.
Select Disabled to enable
only one execution core unit
within a CPU.
CPU
Intel Hyper-Threading
Technology • Disabled
• Enabled
Select Enabled to enable
additional CPU threads.
These Threads appear as
additional processors but
share some resources with
the other threads within a
CPU.
Select Disabled to enable
only one threads within
each execution core unit.
Intel AMT Control • Disabled
• Enabled
• Permanently Disabled
If you select Enabled,
Intel Active Management
Technology (AMT) is
configured and additional
setup items are provided in
Management Engine BIOS
Extension (MEBx) Setup.
If you select Permanently
Disabled, you will never be
able to enable it again. Be
cautious when you want to
use this option.
Note: You can enter the
MEBx Setup menu by
pressing the Ctrl+P key
combination in the Startup
Interrupt Menu window. To
display the Startup Interrupt
Menu window, press the
Intel AMT
Chapter 8 . Advanced configuration 113