Copies too light or dark, Copy cut off, Scan troubleshooting – Kodak 5300 User Manual
Page 92: Scan fails, Probable cause 1, Probable cause 2, Probable cause 3, Probable cause 4
Chapter 8
Copies too Light or Dark
The brightness setting for copies is set too light or dark.
Adjust the brightness setting for copies
See Change Brightness or Copy Settings.
Copy Cut Off
The original is larger than the paper loaded.
When the original is larger than the paper loaded, use the Fit to Page option to reduce your original to the
size of the paper loaded.
Scan Troubleshooting
Scan Fails
Probable Cause 1
Your computer is not turned ON.
Turn on your computer.
Probable Cause 2
Your EasyShare AiO is not connected to your computer.
Connect your EasyShare AiO to your computer with a standard USB cable.
Probable Cause 3
The EasyShare AiO Home Center software is not installed.
Insert the Kodak EasyShare 5000 All-in-One Printer installation CD and install the software.
Probable Cause 4
Your computer system resources may be low.
1
Turn off your computer and EasyShare AiO and then turn them back on.
2
If the problem still persists, try scanning at a lower resolution.
88
Kodak EasyShare 5300 AiO