Kodak 5300 - Manual (Page 78)

Chapter 7
To calibrate from control panel
1 Load the main tray or photo tray with photo paper.
IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly
recommended for calibrations.
2 Press Menu .
3 Press
b
until Calibrate Printer is selected.
4 Press OK. A new screen appears with Print Calibration Page selected.
5 Press Start and follow the instructions on the LCD screen to complete the calibration.
Clean Printhead
If you notice a degradation in the quality of prints, the printhead may need cleaning.
To clean printhead from computer
1 Start the AiO Home Center.
2 Click to open the Help panel.
3 Under General Links, click Maintenance.
4 Click Printhead Cleaning.
To clean printhead from control panel
1 Press Menu to display the Main Menu.
2 Press
b
until Clean Printhead is selected.
3 Press OK to go to the Clean Printhead menu.
4 Press OK to perform a Basic Clean.
or
Press
b
to select Deep Clean and press OK to perform a Deep Clean.
Replace Printhead
1 Make sure the EasyShare AiO is on.
2 Open the printer access door. The carriage moves to a center position.
74 Kodak EasyShare 5300 AiO