Kodak 5300 - Manual (Page 27)

Getting Started
The default setting for using a detected DPOF file is Yes.
1 Press Menu to display the main menu.
2 Press
b
to select Photo Print Settings.
3 Press OK.
4 Press
b
to select Use Print Order if Found.
5 Press
_
or
`
to change the setting.
6 Press OK.
Scene Balance
Your EasyShare AiO is configurable to apply automatic scene balance improvements (brightness) for
photos printed on the AiO from camera cards and USB connected devices. The default is to apply the
scene balance improvements.
1 Press Menu to display the main menu.
2 Press
b
to select Photo Print Settings.
3 Press OK.
4 Press
b
until Scene Balance is selected.
5 Press
_
or
`
to enable or disable Scene Balance.
6 Press OK.
Add Date to Prints
You can set your EasyShare AiO to print the date a picture was taken on the photo print. The default is to
not print the date.
1 Press Menu to display the main menu.
2 Press
b
to select Photo Print Settings.
3 Press OK.
4 Press
b
until Add Date to Prints is selected.
5 Press
_
or
`
to enable or disable date printing.
6 Press OK.
Button Sounds
You can configure your EasyShare AiO to emit an audio feedback beep when you press a button on the
Control Panel. The default setting is to beep.
1 Press Menu to display the main menu.
2 Press
b
until Control Panel Settings is selected.
3 Press OK.
4 Press
_
or
`
to enable or disable button sounds.
5 Press OK.
User’s Guide 23