Kodak 5300 - Manual (Page 28)

Chapter 2
Minutes to Standby
When the Kodak EasyShare All-in-One is idle for the standby power setting timeout period, it enters the
Standby state. The On/Off indicator remains lit, but power consumption is reduced. When in the Standby
state, any activity such as a single button press, or inserting camera card, brings the EasyShare AiO out of
the Standby state and returns it to the Ready state.
You can set the standby timeout from 10 – 30 minutes. The default setting is 15 minutes.
1 Press Menu to display the main menu.
2 Press
b
until Control Panel Settings is selected.
3 Press OK. The Power Settings menu is displayed with Minutes to Standby selected.
4 Press
_
or
`
to change the standby timeout period.
5 Press OK.
Date and Time
Your Kodak EasyShare All-in-One contains a clock for stamping the date and time on scans to a memory
card.
1 Press Menu to display the main menu.
2 Press
b
until Date and Time is selected.
3 Press OK to go to the Date and Time menu.
4 Press
_
or
`
to set the Year.
5 Press OK.
6 Press
_
or
`
to set the Month.
7 Press OK.
8 Press
_
or
`
to set the Day.
9 Press OK.
10 Press
_
or
`
to set the Hour.
11 Press OK.
12 Press
_
or
`
to set the Minute.
13 Press OK.
24 Kodak EasyShare 5300 AiO