Kodak 5300 - Manual (Page 77)

Maintenance
6 Slide the ink cartridge into the printhead.
7 Press down on the tab until you hear a click and feel the latch snap into position.
8 Close the printer access door.
Printhead
The printhead dispenses the ink from the ink cartridges onto the paper. Printer maintenance involves:
„ Calibration
„ Clean the printhead
Calibration
T he Kodak EasyShare AiO performs a calibration every time you install or replace a printhead. However,
you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads
and performs a nozzle health check to enable high-quality prints.
To calibrate from computer
1 Load the main tray or photo tray with photo paper.
IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly
recommended for calibrations.
2 Start the AiO Home Center.
3 Click to open the Help panel.
4 Under General Links, click Maintenance.
5 Click Calibration to make a calibration print.
6 Follow the instructions on the calibration print to calibrate the printer.
User’s Guide 73