Kodak 5300 - Manual (Page 8)

Chapter 1
Power Light on Power Cord
Light Status Cause Action/Solution
The printer to power supply cord
is not properly connected to the
Power Supply. Reseat the printer to power
supply cord.
The power supply to your wall
outlet cord is not properly
connected to your wall outlet. Reseat the Power Supply to your
Wall Outlet Cord.
You do not have the appropriate
power available at your wall
outlet. Test your wall outlet by plugging
a known working device into you
wall outlet. Have your wall outlet
checked by a qualified
electrician.
Power cord light is off.
There may be an issue with the
power supply. Visit Kodak.com for additional
troubleshooting steps or contact
your local Kodak Call Center.
Power cord light is on. The power cord and power
supply are properly connected
and ready to supply power to the
printer. Ensure that the power cord is
properly plugged into the back of
the printer.
4 Kodak EasyShare 5300 AiO