Kodak DP900 - Manual (Page 70)

3/99 71
Appendix D
Using Video Mirroring with a PowerBook
Computer
When you turn video mirroring (called SimulScan in newer
PowerBooks-see below) on, the projector displays the same
information that appears on your PowerBook’s built-in screen.
When video mirroring is off, the projector acts like a separate
display.
To turn on video mirroring for the first time:
1. Open the Monitor’s control panel; click on Monitor 2.
2. Set the number of colors you want.
3. Open the Control Strip; click on the monitor icon.
4. Select “Turn Video Mirroring On.”
Now you can turn video mirroring on and off from the Control
Strip without having to open the Monitor’s control panel again.
When using video mirroring and high color graphics such as slide
shows, the projected image occasionally might turn black and
white. If this happens, perform the following steps:
1. Turn off video mirroring.
2. Open the Monitor’s control panel.
3. Move the white menu bar to Monitor 2 to set the projector as
the primary monitor.
4. Restart the PowerBook.