Kodak DP900 - Manual (Page 6)

Reference Manual KODAK DP900 / DP1100
2 3/99
Safety Terms:
• Warning: Don’t look directly into the lens when the
projector is turned on.
• Warning: Don’t block ventilation openings.
• Warning: To replace the lamp, turn the power off
and unplug the power cord. To avoid burns, wait 30
minutes before opening the lamp door. Follow all
instructions provided in the Reference Manual.
• Warning: Please use the power cord provided.
Connect the power cord to a receptacle with a
protective safety (earth) ground terminal.
• Warning: Refer all service to qualified service personnel.
Servicing your own projector will void the warranty. See “If
You Need Assistance” on page 8 for the customer service
contact information.
• Caution: Don’t set liquids on the projector. Spilled liquids
may damage your projector.
• Caution: Don’t place the projector on a hot surface or in
direct sunlight.
• Caution: Do not drop the projector. Transport the projector
in a Kodak-approved case.
• Caution: For ceiling mount installations, please use the
ceiling mount recommended in the Reference Guide and
follow all instructions provided with it.
• Caution: The projector lamp bulb is pressurized and may
rupture after more than 1,000 hours use. Always change the
bulb as soon as you notice a decrease in the brightness.