Kodak DP900 - Manual (Page 55)

Maintenance & Troubleshooting
3/99 53
Problem: Image is “noisy” or streaked
Try these steps in this order.
1. Deactivate the screen saver on your computer.
2. Turn Auto Image off and then back on again. See “Auto
Image” on page 35.
3. Adjust the synchronization and tracking manually to find an
optimal setting. See “Manual Sync” on page 36 and “Manual
Tracking” on page 36.
• The problem could be with your computer’s video
card. If possible, connect a different computer.
Problem: Projected colors don’t match the
computer or video player’s colors
Just as there are differences in the displays of different monitors,
there are often differences between the computer image and the
projected image.
• Adjust the colors using the KODAK Image Manager.
See “Kodak Menu” on page 42.
• Adjust the brightness, tint and/or contrast from the
Display menu. See “Brightness” on page 32, “Tint” on
page 32 and “Contrast” on page 33.
Problem: Lamp seems to be getting dimmer
• The lamp begins to lose brightness when it has been in
use for a long time. Replace the lamp as described in
“Replacing the Projection Lamp” on page 46.
Problem: Lamp shuts off
• A minor power surge may cause the lamp to shut off.
Turn the projector off, wait at least a minute, then turn
it back on.
To contact Kodak support see “If You Need Assistance” on
page 8
.