Kodak DP900 - Manual (Page 28)

3/99 25
Using the Projector
This section describes how to use and make adjustments to the
projector. It also provides a reference to the keypad and remote
buttons and the options available from the on-screen menus.
Basic Image Adjustment
1. Make sure you have powered up your equipment in the right
order (page 22).
2. If the image doesn’t display completely, zoom the image
(page 28), adjust the height of the projector (page 28) or
center the image by adjusting its horizontal or vertical
position (page 36). Be sure the projector is at a 90 degree
angle to the screen.
3. If the image is out of focus, rotate the focus lens (page 28).
4. If the image appears to shimmer or if it has blurry vertical
bars after you have adjusted the focus, turn Auto Image
(page 35) off and then back on to reset the automatic sync
and tracking. If that doesn’t clear up the image, turn Auto
Image off and adjust the sync (page 36) and/or the tracking
(page 36) manually.
5. If the colors don’t look right, scroll through the KODAK
Image Manager settings. See “Kodak Menu” on page 42
Or
Adjust the brightness (page 32).