Kodak DP900 User Manual
Page 50
Reference Manual KODAK DP900 / DP1100
48
3/99
&DXWLRQ 'R QRW GURS WKH ODPS PRGXOH RU WRXFK WKH JODVV
EXOE 7KH JODVV PD\ VKDWWHU DQG FDXVH LQMXU\
Figure 25 Removing the lamp module
8. Align the new lamp module in the correct direction.
9. Gently push the module in as far as it goes.
10. Tighten the screws on the outside of the module.
11. Slide the lamp connector to the left to re-attach it.
12. Insert the tabs at the top of the lamp door into the projector
and press the lamp door into place.
13. Plug in the power cord and turn the projector back on.
14. To reset the lamp hour counter in the Status window, press
and hold the left mouse button, then press the menu button
(while still holding down the mouse button) for 5 seconds.
Verify that the counter was reset by pressing the menu button
and viewing the counter in the Status window.