Kodak DP900 - Manual (Page 41)

Reference Manual KODAK DP900 / DP1100
38 3/99
Standby Time
This option lets you select how long the lamp stays on and the
blank screen is displayed when the projector enters standby mode
before the projector turns off. Select among 1, 5, 10, and 15
minutes and 1 and 2 hours by clicking either mouse button and
cycling through the options.
Ceiling Projection
Note: To order the Ceiling Mount Kit, refer to “Optional
Accessories” on page 60.
When you turn Ceiling Projection on, the projector turns the image
upside down for ceiling-mounted projection. Highlight Ceiling
Projection, then click either mouse button to turn this feature on
and off.
Rear Projection
When you turn Rear Projection on, the projector reverses the image
so you can project from behind a translucent screen. Highlight
Rear Projection, then click either mouse button to turn this
feature on and off.
Default Source
Default Source toggles between Computer and Video. This
determines which source the projector checks first for active
video during power-up. Highlight Default Source and click either
mouse button to toggle between the options.
Auto Source Select
This setting toggles between On and Off. When this feature is
Off, the projector defaults to the source selected in Default
Source. To display another source, you must manually select one
by pressing the button on the keypad. When this feature is
On, the projector automatically finds the active source, checking
the default source first. Highlight Auto Source Select and click
either mouse button to turn this feature on and off.