Kodak DP900 - Manual (Page 23)

Setting up the Projector
3/99 19
If your computer has a USB connector and is running Windows
98, use the USB mouse cable.
Note: The USB mouse is supported for use with Windows 98
only.
1. Plug the end of the mouse cable into the mouse
connector on your computer.
2. Plug the end of the mouse cable into the connector on
the cable hub.
You must have the appropriate USB drivers installed on you
computer to use the USB feature. Windows 98 ships with the
appropriate drivers.
Now you’re ready to power up the projector and your computer.
Skip to “Starting the Projector” on page 22.