Kodak DP900 User Manual
Page 25
Setting up the Projector
3/99
21
Figure 10 Connecting with an S-video cable
4. Plug the A/V cable’s white connector into the left “audio out”
port on your video player. Plug the cable’s red connector into
the right “audio out” port on the video player (Figure 9 and
Figure 10).
&DXWLRQ
IRU D FRD[LDO FDEOH FRQQHFWLRQ '2 127 XVH WKLV WR
FRQQHFW WR WKH SURMHFWRU
•
If you’re using an S-video cable, the yellow connectors
on the A/V cable remain unused (Figure 10).
5. Plug the A/V cable’s other white and red connectors to the
left and right “audio in” ports on the projector.
The projector is compatible with these major broadcast video
standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and
SECAM. It automatically adjusts to optimize its performance for
the incoming video. The input signals for SECAM, PAL-M, and
PAL-N video are similar to other video signals and cannot be
automatically detected, therefore they must be chosen manually.
See “Video Standard” on page 37 for details.
A/V cable
S-video cable