Menu, Mouse buttons, Standby – Kodak DP900 User Manual
Page 33: Volume (keypad only)
Reference Manual KODAK DP900 / DP1100
30
3/99
Menu
Press
to open the on-screen menus (the keypad lights
green). Press
again to close the menus. When you close the
menus, the projector saves any changes you made. For more
information about the on-screen menus, see page 31.
Mouse buttons
Use the left and right mouse buttons to make selections and
adjustments in the menus. See “Using the On-Screen Menus” on
page 31 for details.
Source (keypad only)
or Computer and
Video (remote only)
When you have more than one source (computer and video)
connected to the projector, select between them by pressing the
source button on the keypad or the Computer or Video button on
the remote.
Standby
When you press
, the display and audio turn off and a blank
screen is displayed for 15 minutes. You can change the amount of
time the projector stays in standby mode; see “Standby Time” on
page 38 for details.
•
If you press
again within 15 minutes, the projector
returns to normal operations immediately.
•
If you press
again after 15 minutes, there is about a
30 second delay before the lamp turns back on.
•
If you don’t press
again, the lamp turns off after 15
minutes.
Volume (keypad only)
•
To increase the volume, press
•
To decrease the volume, press
Volume adjustments are saved for each source connected.